Diana grubu silahların kompresyon odasını yağlamak için pyramydair ve review center'da tavsiye edilen chamber lube ürününü veya bu işi görebilecek benzeri silikon yağlama ürününü Türkiye'de bulma şansım var mı?
Makina yeni olduğundan sökülüp yeşil gres uygulamasına pek sıcak bakmıyorum. 
Diana mod 48 için yapılan bir review:
The use of RWS Chamber oil every is necessary every few months. Three
times a year sparingly. You'll need to cure it cocking and uncocking it
to spread the oil within the chamber, then stand it muzzle down to
exude the excess if any oil. On the first few shot there will be loud
deisling. gradually smoothing out with a minimum of smoke.
Crosman chamber lube için pyramydairde yapılan bir review:
Things I liked:Worked extremely well...........Do not use any
kind of mineral oils if you have a springer........this is the stuff
you want to use........does not diesel and works like a charm by
creating a nice seal between the piston and the inner wall of the
airgun.........lubrication of the piston/seal means that you will get
consistent and stable power from each shot........which is extremely
important for accuracy
Things I would have changed:Nothing
What others should know:I
have a Crosman Quest 1000x which developed a problem after 1000 shots.
The seal or piston of the gun was slightly damaged because of the use
of regular mineral gun oil. It would diesel and make a loud noise when
used and followed by several pellet shots. However, when I used this
product, the little damage that had occurred was sealed by the silicon.
I used a couple of drops of this and let the gun sit for 5-6 hours with
the barrel pointing upward. Now my groups went from being all over the
2x4 target to a respectable 1/4 inch c-t-c with open sights at 20
yards.
